Information Details
Production Process Characteristics of BL Flange for A105 Blind Plate
Release time:
2021-02-04
Source:
A105Blind plateBLFlangeIt is a detachable connector and a product with high sealing requirements. The key is in the sealing material, the sealing material is good or bad, directly related to the quality of the flange product seal, it can be said that the gasket is small, but the relationship between the flange seal failure.
GeneralA105Blind plateBLFlangeThe bearing weight is relatively large, and it is generally not easy to deform in engineering. The key is the thickness problem. Large flanges are not a problem in the inner and outer diameters of the production side, and the thickness is especially difficult to process.A105Blind plateBLFlange a little too thin will be easy to deformation, of course, in the production process generally does not appear deformation problem, in the machine tool processing will not happen, but in the use of the process is dangerous.A105Blind plateBLFlangeUse the middle plate to cut into slats, then roll them into circles, and then process water lines, bolt holes, etc. This is generallyA105Blind plateBLFlangeLarger can be done.7of rice. This kind of flange has good quality assurance, because the raw material is medium plate, the density is good, the material is carbon steel, stainless steel, alloy steel and so on.
A105Blind plateBLFlangeProduction process characteristics: large flange products are all welded products, no screw thread. The production process of blind flange includes forging, rolling and splicing. First, the middle plate is cut into suitable strips. The length of the strips is determined according to the specifications of the large flange. Then, the ring winding machine is used to roll into a circle. The joint is welded firmly with welding rods. The joint shall be welded firmly.XSpectral inspection. Then press it to flatten it, then use lathe to process waterline, chamfer and other processes, and then use the indexing plate to cooperate with the drilling machine to process the bolt hole.
A105 blind plate BL flange, alloy steel F11 high neck LWN flange, mixer truck raceway, carbon steel stainless steel valve body forging, large grinding ring 3 m forging, American standard EN1092-1P245GH flange, rotating A694F52A350LF2A182F51 flange, marine DNV,LR Flange