A105Blind plateBLFlangeTo isolate, cut off the role, and the head, the role of the cap is the same, because of its good sealing performance, for the need to completely isolate the system, generally as a reliable means of isolation. When normal operation is required, the throttle ring end is used, and it can also be used to fill the installation gap of the blind plate on the pipeline. Another feature is that the identification is obvious and the installation state is easy to identify.A105Blind plateBLFlangeThat is, the movable flange is generally matched on the water supply and drainage fittings. When the manufacturer leaves the factory, both ends of the expansion joint have a flange, which is directly connected with the pipeline and equipment in the project by bolts, that is, the flange with looper.

A105Blind plateBLFlangeThe connection method is actually controlled in accordance with the form and standard in the connection, which can show good performance advantages and value, and fully show good performance.A105Blind plateBLFlange connection:

A105Blind plateBLFlangeCan use flange connection. That is, the gasket is placed between the sealing surfaces of the two flanges. After the nut is tightened, the specific pressure on the surface of the gasket will be deformed after reaching a certain value, and the unevenness on the sealing surface will be filled to make the connection tight and leak-free. However, the different pressure of the flange blind plate has different thickness and the use of different bolts, in the oil medium system,A105Blind plateBLFlangeGalvanizing is not required. However, when used in other media systems, the flange blind plate should be hot-dip galvanized, and the weight of the zinc dipping layer is small.610g/m2The quality of flange blind plate after hot dip galvanizing should be inspected according to national standards.

SocketA105Blind plateBLFlangeThe connection method is suitable for pipe diameters from φ32-315mmThe pipe connection, its performance characteristics: non-rigid connection, removable, tensile resistance. To install the socket-type telescopic short pipe connector, it is necessary to fix it with an anchor pipe clip to prevent the position of the socket pipe from moving during thermal expansion and contraction.