Information Details
What is the principle of the raceway of the cement mixer truck?
Release time:
2022-12-16
Source:
Let me tell you about cement.Mixer truck racewayWhat is the principle?
CementMixer truck racewayWhat is the principle?
The concrete mixer truck is a professional vehicle for transporting concrete. The round mixer drum at the top is particularly prominent. On the road, we see that the tank of the concrete mixer is in a rotating state. In order to prevent the concrete from solidifying, what is the principle of the raceway of the cement mixer truck?
CementMixer truck racewayWhat is the principle?
The principle of the concrete tanker is the same as that of the concrete mixing barrel, except that the mixing barrel is pulled by a truck and stirred while walking. When you reach the destination, you can put down the cement! Under normal circumstances, the concrete in the tanker will not condense, because as long as there is concrete in the mixing tank, no matter the vehicle is driving or parking, the mixing tank needs to keep rotating at a low speed. During transportation, the rotating speed of the drum is about 4~8 revolutions per minute. Maintaining rotation has several advantages: as long as the concrete does not segregate, the concrete will not collapse! Secondly, the mixing function makes the concrete more uniform!
The difference between a concrete tanker and an ordinary car lies in the hydraulic transmission system, because the concrete tanker needs additional power to drive it to rotate. This is due to the hydraulic transmission system. The power comes from the power take-off on the gearbox, which drives the hydraulic oil pump. The distributor (valve group) drives the hydraulic motor to rotate. The hydraulic motor drives the concrete tank to rotate through the deceleration system. The distributor changes the direction of rotation of the drum by changing the direction of the hydraulic oil, so as to achieve mixing and discharging.
Although the rotation can extend the initial setting time of concrete, but this time can not be extended indefinitely! When the speed of the concrete tank is 4-8 r/min, the initial setting time of the concrete can be maintained at about 3-5 hours, which of course has a certain relationship with the weather temperature and the mix ratio of concrete. If there is a traffic jam, the speed can be appropriately increased. If the weather is too high and the initial setting event is shortened, the water can be properly replenished, but the construction party has strict regulations: no water is added halfway! Will affect the quality of concrete, reduce the strength and so on.
CementMixer truck racewayHow to maintain?
1. Flush the feed inlet with water before each loading to keep the feed inlet moist during the loading process;
2. When loading, fill the washing water tank with water;
3. After the cement mixer truck is installed into the raceway, flush the feed inlet and clean up the residual concrete near the feed inlet;
4. After unloading at the construction site, flush the unloading tank, and then add 30-40L of cleaning water to the concrete storage tank. When the vehicle returns, keep the concrete storage tank rotating slowly in the positive direction;
5. Remember to drain the sewage in the concrete storage tank before loading next time;
6. After work every day, clean up the concrete storage tank and around the inlet and outlet to ensure that the cement and concrete are not stuck.
As long as the above work is not carried out seriously once, it will bring great trouble to the future work.
The above is the small editor to explain the "cement mixer truck raceway principle is what?" content, I believe we have a certain understanding, if you want to know more about the content of the mixer truck raceway, welcome to contact us, our company will have professionals to serve you, thank you for watching, we see you in the next issue.
Mixer truck raceway